Maintenance Video:

https://drive.google.com/file/d/1g-MzvlwSLxZ8YDnOghK3pH-UViT5ZdsY/view?usp=sharing

Description of the Repair Process:

Preliminary Inspection

Before starting the work, inspect the roof for any damage. It is important to identify defects in advance that cannot be addressed at later stages. Detailed information on how to inspect the roof is provided.: RV Roof Inspection

<aside> 💡

If any unplanned repairs are identified, inform the company office so the PM can discuss them with the client. Additional work can only begin after it has been approved.

</aside>

Cleaning the Work Surface

Sweep the Roof: Remove dirt, dust, sand, and other debris from the roof.
Additionally, during any repair (except for small repairs), we clean the gutters.
Remove the Refrigerator Vent Before Washing.
Before Washing, Remove the Cover That Seals the Vent.
Wash the roof using one of the following methods:
pressure washer
a brush with a hose if the pressure washer is not working
a bucket with a cloth if the pressure washer is not working
a rough brush if there is no access to water at all

<aside> 💡

If the roof configuration does not allow for safe standing on its surface (due to a slippery or sloped area), the washing should be performed from a ladder. After that, use a special squeegee to remove any excess water.

</aside>

Ensure the Roof is Completely Dry Before Applying the Coating. If Necessary, Use a Brush, Blower, or Wipe It with a Cloth to Remove Any Remaining Moisture.

<aside> 💡

During the Application of “1-2 Layers of Silicone,” You Need to Remove: - Solar panels </aside>

Inspection of Problem Areas

If there are minor issues on the roof (cuts, scratches), we mark them with masking tape. These tasks are considered maintenance and are not additional repairs.

Removal of Old Sealant

Remove the old sealant from the front & back caps, as well as from penetrations where the sealant is damaged. If the old sealant has multiple thick layers and forms a raised “mound,” scrape it down to level the surface.